Presto-Weld drip edge is a factory-fabricated coated metal edge system used to terminate at the perimeter of a PVC or TPO membrane. This edge comes with a factory applied, 8 wide PVC flashing strip or 6 wide TPO flashing strip of Johns Manville membrane to help.
Johns Manville Drip Edge features an L shaped continuous cleat with pre-slotted fastening holes for ease of locating and installing. It is… Presto-Weld Coated Drip Edge . Presto-Weld Drip Edge is a factory-fabricated coated metal edge system used to terminate at the perimeter of a PVC or TPO membrane. This edge comes…
Johns Manville routinely evaluates its performance in all customer interactions and believes this change will provide the optimal level of service to our customers. Effective immediately, all Edge Metal requests can be sent to EdgeMetal@ jm .com. We are excited to welcome Haley Franco as the dedicated Account Specialist supporting Edge Metal .
See how Johns Manville specialty products – expansion joints, vents and drains, and edge metal systems – are the right solution for your roofing conditions. If you can draw it, we can make it. See how Johns Manville specialty products – expansion joints, vents and drains, and edge metal systems – are the right solution for your roofing …
Johns Manville Drip Edge features an L shaped continuous cleat with pre-slotted fastening holes for ease of locating and installing. It is manufactured in 12′-‘0 lengths that provide fewer joints/seams and fewer pieces to handle for faster installations.
Presto-Weld drip edge is a factory-fabricated coated metal edge system used to terminate at the perimeter of a PVC or TPO membrane. This edge comes with a factory applied, 8 wide PVC flashing strip or 6 wide TPO flashing strip of Johns Manville membrane to help.
To sum it up, JM Bullion is not a scam. It’s a legit precious metal dealer that has been operating since 2011. However, the complaints filed against the company with the BBB can leave one feeling a bit on edge .
Use: Fabricated by the contractor into metal flashings and edge details. It is used to provide monolithic water-tight protection for both adhered and mechanically fastened roofing assemblies. Materials: 20 mil (0.51 mm) UV-resistant PVC (polyvinyl chloride) with Elvaloy® KEE (ketone ethylene ester) membrane laminated to 24 gauge (0.6 mm) galvanized steel.
Use: To strip in metal flanges on JM TPO Membrane systems or as directed by JM technical services. Materials: 30 mil (0.76 mm) thick, non-reinforced TPO (thermoplastic polyolefin membrane with a 30 mil (0.76 mm) thick, factoryapplied peel and stick adhesive tape.
Find the resources you need to design the best roofing system for your project. Whether you’re in the design phase or on the roof, we can provide the tools and support to get the project done right.Contact our Specifier Services Team
